ZCC-CT
ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£26.25 excl. VAT
£31.50 incl. VAT
ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£18.90 excl. VAT
£22.68 incl. VAT
ZCC-CT UM-4EFP 4 Flute Short Cutting Edge Variable Helix End Mill
ZCC-CT UM-4EFP Series 4 Flute Short Cutting Edge AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£22.36 excl. VAT
£26.83 incl. VAT
.jpg&w=640&q=75)
MVVNN 72.3 Deg.Multi Lock Turning Tool Holder (VN**)
- Multi Clamp System
- Suitable for VN** Style Inserts
- 72.3 Degree Approach
£37.42 excl. VAT
£44.90 incl. VAT
.jpg&w=640&q=75)
SDUCR/L 93 Deg. Carbide Shank Through Coolant Screw Clamp Boring Bar (DC**)
- Carbide Shank
- Screw Clamp System
- Through Coolant
- Suitable For DC** Style Inserts
- 93 Degree Aproach
£85.83 excl. VAT
£103.00 incl. VAT
ZCC-CT UM-4ELP-W 4 Flute Long Cutting Edge Weldon Shank Variable Helix End Mill
ZCC-CT UM-4ELP-W Series 4 Flute Long Length Weldon shank AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£25.13 excl. VAT
£30.16 incl. VAT
.jpg&w=640&q=75)
SVVCN 72.3 Deg.Screw Clamp Turning Tool Holder (VC**)
- Screw Clamp System
- Suitable for VC** Style Inserts
- 72.3 Degree Approach
£33.12 excl. VAT
£39.74 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£0.00 excl. VAT
£0.00 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£7.34 excl. VAT
£8.81 incl. VAT
ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£33.18 excl. VAT
£39.82 incl. VAT
.jpg&w=640&q=75)
DSBNR/L 75 Deg.Double Clamp Turning Tool Holder (SN**)
- Double Clamp System
- More Rigid Insert Clamping
- Suitable For SN**
- 75 Degree Approach
£35.31 excl. VAT
£42.37 incl. VAT
.jpg&w=640&q=75)
PTTNR/L 60 Deg.Lever Lock Turning Tool Holder (TN**)
- Lever Clamp System
- Suitable For TN**
- 60 Degree Approach
£32.70 excl. VAT
£39.24 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£0.00 excl. VAT
£0.00 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£6.87 excl. VAT
£8.24 incl. VAT
ZCC-CT 1165PA03 PA Series 3 Flute Solid Coated Carbide Twist Drill Aluminium & Non-Ferrous Drilling - 3xD Stub Drill
1165PA03 PA Series by ZCC-CT.
- Designed to machine materials with short chips such as aluminium and non-ferrous materials
- 3xD stub drill
- 3 flutes
£14.45 excl. VAT
£17.34 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£6.81 excl. VAT
£8.17 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£0.00 excl. VAT
£0.00 incl. VAT
.jpg&w=640&q=75)
SVUBR/L 93 Deg. Steel Shank Screw Clamp Boring Bar (VB**)
- Screw Clamp System
- Suitable For VB** Style Inserts
- 93 Degree Approach
- Steel Shank
£77.24 excl. VAT
£92.69 incl. VAT
.jpg&w=640&q=75)
SVUCR/L 93 Deg. Steel Shank Screw Clamp Boring Bar (VC**)
- Screw Clamp System
- Suitable For VC** Style Inserts
- 93 Degree Approach
- Steel Shank
£39.00 excl. VAT
£46.80 incl. VAT
CNMG Finishing Insert For Machining Steel Grade YBC152 (ZCC-CT)
CNMG-DF carbide turning insert for finishing
- Grade YBC152 is our best performing finishing insert for turning steel
- CVD coated
- DF chipbreaker is designed for finishing
- CNMG negative geometry
- 80° rhombic Insert
£3.74 excl. VAT
£4.49 incl. VAT
90° Indexable End Mill for Insert Style APKT - ZCC-CT
- Diameter range Ø12 – 63 mm
- For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
- For square shoulder milling, slot milling and ramping
- Milling cutter with positive, soft cutting geometry
- Inserts with two cutting edges
£49.82 excl. VAT
£59.78 incl. VAT