ZCC-CT
DNMG Finishing Insert For Machining Steel YBC152 Grade (ZCC-CT)
DNMG-DF carbide turning insert for finishing
- Grade YBC152 is our best performing finishing insert for turning steel
- CVD coated
- DF chipbreaker is designed for finishing
- DNMG negative geometry
- 55° rhombic Insert
£5.88 excl. VAT
£7.06 incl. VAT
DCMT Finishing Insert For Machining Stainless Steel YBM153 (ZCC-CT)
DCMT-EF carbide turning insert for finishing
- Grade YBM153 is our best performing finishing insert for turning steel
- CVD coated
- EF chipbreaker is designed for finishing
- DCMT positive geometry
- 55° rhombic Insert
£3.91 excl. VAT
£4.69 incl. VAT
SDUCR/L 93 Deg. Steel Shank Screw Clamp Boring Bar (DC**)
- Screw Clamp System
- Suitable For DC** Style Inserts
- 93 Degree Approach
- Steel Shank
£25.00 excl. VAT
£30.00 incl. VAT
PSDNN 45 Deg.Lever Lock Turning Tool Holder (SN**)
- Lever Clamp System
- Suitable for SN** Style Inserts
- 45 Degree Approach
£31.30 excl. VAT
£37.56 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£8.12 excl. VAT
£9.74 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£6.18 excl. VAT
£7.42 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£8.27 excl. VAT
£9.92 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£8.27 excl. VAT
£9.92 incl. VAT
DDJNR/L 93 Deg. Double Clamp Turning Tool Holder (DN**)
- Double Clamp System
- More Rigid Insert Clamping
- Suitable For DN**
- 93 Degree Approach
£50.27 excl. VAT
£60.32 incl. VAT
PWLNR/L 95 Deg. Steel Shank Lever Lock Boring Bar (WN**)
- Lever Lock Clamp System
- Suitable For WN** Style Inserts
- 95 Degree Approach
- Steel Shank
£52.23 excl. VAT
£62.68 incl. VAT
MSDNN 45 Deg.Multi Lock Turning Tool Holder (SN**)
- Multi Clamp System
- Suitable for SN** Style Inserts
- 45 Degree Approach
£47.39 excl. VAT
£56.87 incl. VAT
SVABR/L 90 Deg.Screw Clamp Turning Tool Holder (VB**)
- Screw Clamp System
- Suitable for VB** Style Inserts
- 90 Degree Approach
£26.16 excl. VAT
£31.39 incl. VAT
ZCC-CT 1588SL12C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 12xD Long Series
1588SL12C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 12xD long series
- Through coolant
£107.33 excl. VAT
£128.80 incl. VAT
ZCC-CT 1588SL30C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 30xD Long Series
1588SL30C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 30xD long series
- Through coolant
£263.80 excl. VAT
£316.56 incl. VAT
ZCC-CT 1588SL10C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 10xD Long Series
1588SL10C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 10xD long series
- Through coolant
£63.94 excl. VAT
£76.73 incl. VAT
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
2 Flute Coated Aluminium Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£19.10 excl. VAT
£22.92 incl. VAT
ZCC-CT 1534SH03 SH Series Solid Coated Carbide Twist Drill for Hardened Steel Drilling - 3xD Stub Drill
1534SH03 SH Series by ZCC-CT.
- Solid carbide with high performance coating for drilling high hardness steel (HRc 40-60) and higher tensile strength.
- 3xD stub drill
£24.70 excl. VAT
£29.64 incl. VAT
ZCC-CT 1588SL15C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 15xD Long Series
1588SL15C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 15xD long series
- Through coolant
£139.45 excl. VAT
£167.34 incl. VAT
SRDCN Screw Clamp Turning Tool Holder (RC**)
- Screw Clamp System
- Suitable for RC** Style Inserts
- Full Radius Insert
£46.96 excl. VAT
£56.35 incl. VAT
DNMG Roughing Insert For Machining Steel YBC252 Grade (ZCC-CT)
DNMG-DR carbide turning insert for roughing
- Grade YBC252 is our best performing roughing insert for turning steel
- CVD coated
- DR chipbreaker is designed for roughing
- DNMG negative geometry
- 55° rhombic Insert
£8.11 excl. VAT
£9.73 incl. VAT
MDJNR/L 93 Deg.Multi Lock Turning Tool Holder (DN**)
- Multi Clamp System
- Suitable for DN** Style Inserts
- 93 Degree Approach
£37.42 excl. VAT
£44.90 incl. VAT
ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill
ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill
- Solid micrograin carbide
- Variable helix geometry
- ALTiN coated
- Sharp cutting edge designed for HRSA
- Smooth machining with minimal vibration
- One tool for roughing and finishing
- Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
- High metal removal rates
£22.48 excl. VAT
£26.98 incl. VAT