Millers Oils

Millcool 20 Semi-Synthetic Cutting Fluid (Millers Oils)

• Bio-stability generated frin boron based composition
• Full multi metal capability
• Nitride, chlorine and phenol free formulation
• Undyed to offer good workpiece visibility

Use as a water based machining and grinding fluid.   Recommended dilution rates between 3% and 8%. Note:  Product should be stored under cover. Avoid extremes of temperature and protect from frost.

Millersol TS Soluble Metal Working Fluid (Millers Oils)

• High level of oil and lubricity additives ensures excellent cutting performance and surface finish
• Tight emulsion results in stable formulation for extended sump life, resulting in both economical fluid consumption and reduced down-time
• Formaldehyde-free, for minimised hazard labelling for operator safety and audit compliance
• Free from chlorine, zinc and heavy metals

Millersol TS is a traditional soluble metalworking fluid with high oil content for enhanced lubricity and corrosion protection during the machining of both ferrous and non-ferrous metals. Millersol TS is free from formaldehyde-release biocides.

Millersol TS is recommended for use on ferrous alloys, aluminium alloys and yellow metals. 

Millersol EP Semi-Synthetic Metalworking Fluid (Millers Oils)

• Low-foaming to provide consistent lubrication and heat removal
• EP additives ensure excellent cutting performance and surface finish even in very arduous applications
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol EP is a semi-synthetic, formaldehyde-free metalworking fluid designed for very arduous applications where EP additives are required.

Millersol EP is recommended for use on a variety of steel and aluminium alloys as well as yellow metals.

Millcool Synth Synthetic Metalworking Fluid (Millers Oils)

• High lubricity promotes excellent tool life
• Forms a stable solution in water between 50ppm and 400ppm CaCO3
• Rejects tramp oil
• Low foam product
• Free from formaldehyde, secondary amines, phenols, nitrites, chlorine and sulphur
• Does not produce sticky residues, clean in use
• Good fines handling properties
• Excellent bio-stability
• Good anti-corrosion properties
• Good workpiece visibility 

Millcool Synth is a synthetic formaldehyde- and chlorine-free metalworking fluid suitable for arduous grinding and cutting operations. For general machining, thread cutting, deep hole drilling and reaming on ferrous, high tensile and stainless steels, inconel, aluminium alloys, plastics and non ferrous composites. 

Millersol LF Semi-Synthetic Metalworking Fluid (Millers Oils) 

• Extremely low-foaming even in high pressure systems and soft water areas, to provide consistent lubrication and heat removal
• High level of lubricity additives ensures excellent cutting performance and surface finish
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Chlorine-free and formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol LF is a semi-synthetic, formaldehyde-free metalworking fluid, designed for severe machining operations where a low foaming product is required.

Millersol LF is recommended for use on ferrous alloys including stainless steel and titanium, aluminium alloys and yellow metals.

Millersol HW Semi-Synthetic Metalworking Fluid For Hard Water Applications (Millers Oils)

• High level of lubricity additives ensures excellent cutting performance and surface finish
• Low foaming formulation and excellent emulsion stability in hard water areas provides consistent lubrication and heat removal, even in high pressure through-spindle coolant systems
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Chlorine-free and formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol HW is a semi-synthetic, formaldehyde-free metalworking fluid, designed for severe machining operations even in hard water areas.

Millersol HW is recommended for use on ferrous alloys, aluminium alloys and yellow metals.

Millersol MP Low Oil Semi-Synthetic Metalworking Fluid (Millers Oils)

• Optimised lubricity and cooling properties ensure quality work piece finish and longer tool life
• Low foaming formulation provides consistent lubrication and heat removal in both hard and soft water
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Multi-metal compatibility allows product rationalisation for subcontractor flexibility as well as simplified ordering and stock holding
• Chlorine and formaldehyde-free formulation ensures minimised hazard labelling for operator safety and audit compliance

Millersol MP is a semi-synthetic, low oil formaldehyde-free metalworking fluid, designed to perform a wide range of cutting and grinding operations across a variety of materials.

Millersol MP is recommended for use on cast iron, ferrous alloys, aluminium alloys, yellow metals and glass. 

Millube Refined Mineral Oil For General Lubrication (Millers Oils)

• Cost effective product where basic level of lubrication is required in general purpose applications
• Thermally stable product
• Long life in circulatory systems

Millube is a range quality, solvent refined mineral oils for general purpose lubrication.

Use as received where a non-additive mineral oil is preferred or specified. The range covers high speed spindles, general purpose lubrication of bearings and moderately loaded gearbox applications. 

Millway Slideway Oil (Millers Oils)

• High lubricity prevents stick-slip of slideways
• Outstanding anti wear and anti corrosion properties
• Non drip formula highly suitable for the lubrication of vertical surfaces
• Careful selection of viscosity means hydraulic performance can be achieved

Millway is a range of slideway oils with outstanding anti-wear and anti-corrosion properties, as well as the inclusion of a tacky adhesive additive to avoid dripping and provide a tenacious film.
Use as received for the lubrication of slideways where smooth, stick-slip-free performance is required or where a tacky adhesive lubricant is required. 

Millmax Hydraulic Oils (Millers Oils)

• Excellent resistance to compression allows for superb power transfer
• Zinc-based anti-wear properties extend equipment lifespan by protecting components from wear
• Excellent thermal and oxidation stability helps maintain system cleanliness over extended periods
• Low-foaming formula reduces aeration and cavitation, ensuring reliable power transfer
• Demulsification prevents water contamination that could lead to rust, corrosion and reduced lubricity
• Compatible with elastomers and seals, promoting longer seal life and minimising maintenance needs

Please see our technical data sheets for more information on viscosities and applications.

Millfood 32 Food Grade Hydraulic Oil (Millers Oils)

• Low friction coefficient provides excellent lubrication and reduces wear.
• Extremely low foaming
• High viscosity index provides excellent thermal stability leading to extended service intervals.
• Halal and Kosher certified

Food grade hydraulic oil formulated from a blend of synthetic oils. Extremely low foaming, with high viscosity index and thermal stability for extended service intervals.

The Millfood range of lubricants is formulated using only FDA listed ingredients and all products have NSF H1 registration for guaranteed food safety compliance, without compromise on lubrication performance.

Millmax Longlife ZF 32 Hydraulic Oil (Millers Oils)

• Outstanding anti-oxidation properties of this oil ensures extended drain intervals, particularly when used in combination with routine oil analysis and fluid management services
• Excellent thermal and oxidation stability helps maintain system cleanliness over extended periods
• Low-foaming formula reduces aeration and cavitation, ensuring reliable power transfer
• Demulsification prevents water contamination that could lead to rust, corrosion and reduced lubricity
• Compatible with elastomers and seals, promoting longer seal life and minimising maintenance needs

Millmax Longlife ZF 32 is suitable for use in a wide range of applications including industrial hydraulic systems, mobile equipment, injection moulding machines, mining and quarrying, and forestry and agricultural equipment.

Meeting strict industry standards including ISO 20763 Vane Pump Test and Fives Cincinnati P68, Millmax Longlife ZF 32 is the ideal choice for machinery requiring extended drain intervals without zinc-containing technology. For a full list of specification please refer to the technical data sheet. 

Millmax High Viscosity Hydraulic Oils (Millers Oils)

• Very high viscosity index ensures consistent fluid performance across a range of temperatures, whilst improving energy efficiency.
• Excellent resistance to compression allows for superb power transfer
• Zinc-based anti-wear properties extend equipment lifespan by protecting components from wear
• Excellent thermal and oxidation stability helps maintain system cleanliness over extended periods
• Low-foaming formula reduces aeration and cavitation, ensuring reliable power transfer
• Demulsification prevents water contamination that could lead to rust, corrosion and reduced lubricity
• Compatible with elastomers and seals, promoting longer seal life and minimising maintenance needs

Please see our technical data sheets for more information on applications. 

Millicut CHF 6 Chlorine Free Neat Cutting Oil (Millers Oils)

• Designed for high speed sliding head and multi spindle machines.
• Extremely pale in appearance giving good work piece visibility.
• Virtually odourless in operation.
• Excellent surface finish on all materials.
• Prolonged tool life due to anti-wear technology.
• Totally Chlorine free and therefore more environmentally friendly.
• Anti-mist additives to enhance operator acceptability.
• Low drag out losses due to low viscosity.
• Highly suitable for machining yellow metals.

Millicut CHF 6 is a chlorine free neat cutting oil formulated using state of the art additive technology and solvent refined based oils for high performance machining.

Precision honing of cast iron, machining of aluminium alloys and non-ferrous materials. 

Millicut CHF 22 Chlorine Free Neat Cutting Oil (Millers Oils)

• Designed for high speed sliding head machines
• Good work piece visibility
• Excellent surface finish on all materials
• Prolonged tool life due to antiwear technology
• Totally Chlorine Free and therefore more environmentally friendly
• Antimist additives to enhance operator acceptability
• Low drag out losses due to low viscosity
• Anti-corrosion performance
• Unique synthetic lubricity enhancement
• Non staining with yellow metals

Millicut CHF 22 is a chlorine free neat cutting oil formulated using state of the art additive technology and solvent refined based oils for high performance machining. 

Used for medium to high tensile steels (including stainless), aluminium alloys, brasses and bronzes.

Millicut CAS 14 Neat Cutting Oil (Millers Oils)

• Light viscosity provides excellent penetration
• Swarf removal readily achieved
• High level of extreme pressure additive treatment provides excellent cutting characteristics
• Teledyne Landis recommendation for their threading machines.

A high performance neat cutting oil produced from solvent refined mineral oils and extreme pressure additives. Included in the formulation is a high level of additive treat to provide superior machining characteristics. Contains active Sulphur.

Particularly suited to arduous metal working operations including broaching and thread cutting. 

Millgrind G Syn Synthetic Grinding Oil (Millers Oils)

• Good corrosion protection of machine and workpiece
• Good levels of bacterial and fungal resistance
• Excellent wheel flushing capabilities
• Remains clear in the presence of tramp oil
• Good workpiece visibility
• High heat dissipation
• Chlorine-free and formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millgrind G Syn is a synthetic formaldehyde- and chlorine-free grinding fluid concentrate of advanced formulation. Ideal for use in all surface, centreless and cylindrical grinding applications. It is also suitable for the grinding of glass and in mirror production. 

Millgear EP Industrial Gear Oil With EP Performance (Millers Oils)

• Extreme pressure protection for reduced wear and extended equipment life
• Excellent thermal stability for increased oil life and relubrication intervals
• Consistent film thickness for protection against micropitting according to FVA 54/7 test
• Minimised deposit formation for improved oil cleanliness and reduced maintenance
• Good compatibility with elastomers and seals for longer seal life and reduced maintenance

Millgear EP is a range of mineral oil based gear oils with extreme pressure additive technology for lubrication and protection of gear teeth, even under high load.

Use as received for industrial gear applications including spur, helical and bevel gears.

Meets the specification for:

• DIN 51517 Part 3
• AIST 224
• AGMA 9005-E02
• SEB 181226
• Flender rev. 12 

Millfood 32 MP Synth Multi-Puropse Oil (Millers Oils)

• Reduces friction and wear to protect components
• Low foaming formulation with high oxidation resistance to reduce varnishing and sludge
• Demulsibility gives rapid separation in case of water ingress
• Excellent thermal stability for extended service intervals – 8000 hrs in compressor applications.
• Extremely wide operating temperature range.
• Halal and Kosher certified

Food grade, synthetic PAO multi-purpose oil ideal for both hydraulic and compressor applications. Wide operating temperature range and high oxidation and thermal stability for extended service intervals.

The Millfood range of lubricants is formulated using only FDA listed ingredients and all products have NSF H1 registration for guaranteed food safety compliance, without compromise on lubrication performance.

Millfood 220 Chain and Gear Oil (Millers Oils)

• Tacky formulation ensures no drip or fling, providing lasting lubrication for chains, and excellent start-up protection in gearboxes.
• Excellent adhesive properties ensures a high degree of water resistance protecting parts from corrosion even in the presence of acidic materials commonly associated with the food and drinks industries.
• High viscosity index provides excellent thermal stability for extended service intervals.
• Demulsification properties ensure total separation of water from oil.
• Halal and Kosher certified

Food grade synthetic PAO chain and gear oil protects against wear and corrosion. High oxidation stability extends oil life, and demulsification properties ensures any water can be easily separated. Tackifier additives result in no-drip formulation.

The Millfood range of lubricants is formulated using only FDA listed ingredients and all products have NSF H1 registration for guaranteed food safety compliance, without compromise on lubrication performance.

Millergrease WG2 (Millers Oils)

• Good mechanical stability extends lubrication intervals
• Excellent load carrying and shock load resistance properties reduces premature component wear
• High level of water resistance ensures long lubricant service life
• Full corrosion protection of working surfaces reduces component costs

Millergrease WG2 is an off-white lithium calcium soap thickened grease, highly resistant to water washout with EP performance.

Designed for use in anti-friction and plain bearings subjected to high load and where water washout is a problem.  

Millergrease NS Copper Anti-Seize Compound (Millers Oils)

• Easy to apply by brush, sponge or lint-free cloth
• Offers long-lasting protection against seizure to aid dismantling
• Wide operating temperature range -20 to +1100°C

Millercare SC System Cleaner (Millers Oils)

• Formaldehyde free
• Good cleaning and bio-resistance
• Suitable for use when converting from oil products to water based
• Does not affect suitably painted surfaces on machine tools
• May be used directly in working emulsions at 2% dilution

A formaldehyde-free system cleaner where aqueous solutions of machining and grinding fluid have been in use.

To be used typically at 2% but increased strength up to 5% where high levels of accumulated dirt require removal. Circulate for 24 hours, with an absolute minimum continuous circulation of 8 hours.
Note: Operatives may continue working but only at the 2% concentration level.