Milling Tools
Eco-Mill 2 Flute Coated Solid Carbide Slot Drill
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill
Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£21.77 excl. VAT
£26.12 incl. VAT
STARKE Coated Carbide 4 Flute Roughing End Mill
- Cut up to 55 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 6mm and 20mm
FRANKEN 4 Flute Long Length High Performance End Mill
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£17.60 excl. VAT
£21.12 incl. VAT
FRANKEN Alu-Cut 2544 Series 2 & 3 Flute Long Length End mill
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£28.86 excl. VAT
£34.63 incl. VAT
ZCC-CT HM-6E Series 6 Flute End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-6E 6 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£28.21 excl. VAT
£33.85 incl. VAT
NANO-MILL Max-Mill JER Series Coated Carbide 4 Flute Corner Radius End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£9.94 excl. VAT
£11.93 incl. VAT
FRANKEN 4 Flute Solid Carbide Corner Radius End Mill
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£21.95 excl. VAT
£26.34 incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£22.29 excl. VAT
£26.75 incl. VAT
ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£41.17 excl. VAT
£49.40 incl. VAT
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£15.37 excl. VAT
£18.44 incl. VAT
Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium
Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£10.25 excl. VAT
£12.30 incl. VAT
Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel
Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£47.08 excl. VAT
£56.50 incl. VAT
2 Flute Long Length End Mill for Aluminium LAE Series
ALI-MAX Solid Carbide 2 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
£17.32 excl. VAT
£20.78 incl. VAT
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.33 excl. VAT
£25.60 incl. VAT
2 Flute Carbide Reduced Neck End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£15.00 excl. VAT
£18.00 incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£8.88 excl. VAT
£10.66 incl. VAT
FRANKEN 3 Flute High Performance Short Length End Mill
FRANKEN Top-Cut 3 Flute High Performance Short Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£13.69 excl. VAT
£16.43 incl. VAT
Max-Mill TiAlN Coated Carbide 2 Flute Long Length End Mill
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
£15.23 excl. VAT
£18.28 incl. VAT
ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel
ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£24.81 excl. VAT
£29.77 incl. VAT
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£7.12 excl. VAT
£8.54 incl. VAT
MasterMill VX Series 4 Flute High Performance End Mill
MasterMill VX 178323 Series 4 Flute High Performance End Mill
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£13.17 excl. VAT
£15.80 incl. VAT
NANO-MILL JE Series Coated Carbide 2 Flute Square Slot Drill
Max-Mill Coated Carbide 2 Flute End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£8.28 excl. VAT
£9.94 incl. VAT
ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.64 excl. VAT
£27.17 incl. VAT