Hardened Steel Milling Cutters Milling Tools

Sort By

Pulsar Blue 109350 Series 2 Flute Rib Processing Ball Nose End Mill.

Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel

Series: 109350

Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£33.64 excl. VAT
£40.37 incl. VAT

View Products Cutting Data

Pulsar Blue 2 Flute Rib Processing Slot Drill for Hardened Steel

Series: 100450

Pulsar Blue 2 Flute Rib Processing Slot Drill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£26.94 excl. VAT
£32.33 incl. VAT

View Products Cutting Data

Pulsar Blue 110350 Series 4 Flute High Feed Corner Radius Short Length End Mill.

Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel

Series: 110350

Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
Corner radius
High speed cutting
High feed geometry
Short flute for maximum strength

Starting From:
£33.50 excl. VAT
£40.20 incl. VAT

View Products Cutting Data

Pulsar Blue 103950 Series 6 & 8 Flute 45 Degree Helix End Mill.

Pulsar Blue 6 & 8 Flute 45 Degree Helix Extra Long Series End Mill for Hardened Steel

Series: 103950

Pulsar Blue 6 & 8 Flute Extra Long End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
45 degree helix
Excellent workpiece finish

Starting From:
£49.82 excl. VAT
£59.78 incl. VAT

View Products Cutting Data

Pulsar Blue 102950 Series 6 & 8 Flute 45 Degree Helix Long Series End Mill.

Pulsar Blue 6 & 8 Flute 45 Degree Helix Long Series End Mill for Hardened Steel

Series: 102950

Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
45 degree helix
Excellent workpiece finish

Starting From:
£38.16 excl. VAT
£45.79 incl. VAT

View Products Cutting Data

Max-Mill Coated Carbide 2 Flute Corner Radius Long Length End Mill

NANO-MILL Max-Mill JLNR Series Coated Carbide 2 Flute Corner Radius Long Length End Mill

Series: JLNR****

Max-Mill Coated Carbide 2 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£13.50 excl. VAT
£16.20 incl. VAT

View Products Cutting Data

Pulsar Blue 4 Flute Extended Neck End Mill for Hardened Steel

Series: 101550

Pulsar Blue 4 Flute Extended Neck End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£30.50 excl. VAT
£36.60 incl. VAT

View Products Cutting Data

ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel Machining.

ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel

Series: HM-4RP

ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£26.25 excl. VAT
£31.50 incl. VAT

View Products Cutting Data

ZCC-CT HM-2E Series 2 Flute End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2E

ZCC-CT HM-2E 2 Flute End Mill with Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£18.90 excl. VAT
£22.68 incl. VAT

View Products Cutting Data

ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank

ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2B

ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£33.18 excl. VAT
£39.82 incl. VAT

View Products Cutting Data

Pulsar Blue 111350 Series 4 Flute High Feed Corner Radius Long Length End Mill.

Pulsar Blue High Feed Long Length Corner Radius End Mill for Hardened Steel

Series: 111350

Pulsar Blue 4 Flute High Feed Long Length Corner Radius End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
Corner radius
High speed cutting
High feed geometry
Short flute for maximum strength

Starting From:
£35.36 excl. VAT
£42.43 incl. VAT

View Products Cutting Data

Pulsar Blue 101650 Series 4 Flute Corner Radius Extended Neck Short Length End Mill

Pulsar Blue 4 Flute Corner Radius Extended Neck End Mill for Hardened Steel

Series: 101650

Pulsar Blue 4 Flute Extended Neck Corner Radius End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Corner radius
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£35.64 excl. VAT
£42.77 incl. VAT

View Products Cutting Data

ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel

Series: HM-4BL

ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£41.17 excl. VAT
£49.40 incl. VAT

View Products Cutting Data

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

ZCC-CT HM-6EL Series 6 Flute End Mill with Long Straight Shank for Hardened Steel Machining

Series: HM-6EL

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£32.22 excl. VAT
£38.66 incl. VAT

View Products Cutting Data

ZCC-CT 4 Flute Reduced Neck End Mill for Hardened Steel Machining.

ZCC-CT HM-4EFP 4 Flute With Reduced Neck for Hardened Steel

Series: HM-4EFP

ZCC-CT HM-4EFP 4 Flute Reduced Neck End Mill with Straight Shank For Hardened Steels

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£34.15 excl. VAT
£40.98 incl. VAT

View Products Cutting Data

Pulsar Blue 100450 series 2 flute corner radius rib processing end mill.

Pulsar Blue 2 Flute Corner Radius Rib Processing Slot Drill for Hardened Steel

Series: 101850

Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Corner radius
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£34.21 excl. VAT
£41.05 incl. VAT

View Products Cutting Data

Pulsar Blue 102350 Series 2 Flute Corner Radius Rib Processing End Mill.

Pulsar Blue 2 Flute Corner Radius Rib Processing End Mill for Hardened Steel

Series: 102350

Pulsar Blue 2 Flute Rib Processing Corner Radius Slot Drill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Corner radius
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£30.02 excl. VAT
£36.02 incl. VAT

View Products Cutting Data

Pulsar Blue 2 Flute Rib Processing Ball Nose Micro End Mill for Hardened Steel

Series: 106350

Pulsar Blue 2 Flute Rib Processing Ball Nosed Slot Drill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£39.42 excl. VAT
£47.30 incl. VAT

View Products Cutting Data

Pulsar Blue 107350 Series 3 Flute 30 Degree Helix Ball Nose End Mill.

Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel

Series: 107350

Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£45.82 excl. VAT
£54.98 incl. VAT

View Products Cutting Data

Pulsar Blue 101750 Series 4 Flute Reduced Neck Corner Radius End Mill

Pulsar Blue 4 Flute Extended Neck Corner Radius Long Length End Mill for Hardened Steel

Series: 101750

Pulsar Blue 4 Flute Extended Neck Corner Radius Long Length End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Corner radius
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£35.87 excl. VAT
£43.04 incl. VAT

View Products Cutting Data

Pulsar Blue 101950 Series 3 Flute Ball Nose End Mill.

Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel

Series: 101950

Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£39.32 excl. VAT
£47.18 incl. VAT

View Products Cutting Data

Max-Mill Coated Carbide 2 Flute Ball Nose Long Length End Mill

NANO-MILL Max-Mill JKB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 150mm OAL

Series: JKB**02

Max-Mill Coated Carbide 2 Flute Extra Long Length Ball Nose End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£33.65 excl. VAT
£40.38 incl. VAT

View Products Cutting Data

ZCC-CT Coated Carbide 2 Flute Slot Drills Long Length

Series: PM2EL

For Machining Up To 55HRC
Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
Diameter Range 3mm - 20mm
Solid Micrograin Carbide
PVD Coated Substrate

Starting From:
£16.67 excl. VAT
£20.00 incl. VAT

View Products

ZCC-CT Coated Carbide 4 Flute End Mills Long Length

Series: PM4EL

For Machining Up To 55HRC
Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
Diameter Range 3mm - 20mm
Solid Micrograin Carbide
PVD Coated Substrate

Starting From:
£17.06 excl. VAT
£20.47 incl. VAT

View Products