Osborn - High Precision Drills, Reamers, Machine & Hand Taps
Osborn 810505 HSS 8% Cobalt TiN Coated Jobber Drill
- Bright finish body for maximum chip clearance
- Self centring split point above 1.6mm
- TiN coated on working area for longer tool life
Ideal for drilling steel, cast steel-alloyed and non-alloyed, stainless steel, titanium and aluminium. Particularly suited to stainless steel and titanium.
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
£1.04 excl. VAT
£1.25 incl. VAT
Osborn 820505 HSS 8% Cobalt TiN Coated Stub Drill
- Bright finish body for maximum chip clearance
- Self centring split point above 1.6mm
- TiN coated on working area for longer tool life
Ideal for drilling steel, cast steel-alloyed and non-alloyed, stainless steel, titanium and aluminium. Particularly suited to stainless steel and titanium.
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
OSBORN 821402 Series 90 Degree HSSE Spot Drill
Osborn HSS 8% cobalt 90 degree HSSE spot drills
£4.30 excl. VAT
£5.16 incl. VAT
Metric Coarse Machine Taps Spiral Flute
- Bright Finish
- General Purpose Tap For A Wide Range Of Materials
- HSSE
- Metric Coarse
- Spiral Flute
£10.49 excl. VAT
£12.59 incl. VAT
Osborn 821601 Steam Tempered HSS Morse Taper Shank Drill
Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic.
- • Bright steam tempered (Black Oxide finish).
- • Morser taper shank.
- • Standard DIN 345
- • Point angle 118 degree
- • H8 tolerance
£12.96 excl. VAT
£15.55 incl. VAT
OSBORN 820502 Series HSS 8% Cobalt Stub Drill DIN1897
Features:
- HSS 8% cobalt stub drill
- Suitable for drilling thin materials with portable drills
- Special twist drills for automatic and turret lathes
- Ideal for general drilling in steels and stainless steels
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
Osborn Metric Coarse Roll Taps
- Tin Coated
- General Purpose Tap For A Wide Range Of Materials
- HSSE
- Metric Coarse
- With Oil Grooves
£11.51 excl. VAT
£13.81 incl. VAT
Metric Coarse Machine Taps Spiral Point
- Bright Finish
- General Purpose Tap For A Wide Range Of Materials
- HSSE
- Metric Coarse
- Spiral Point
£10.49 excl. VAT
£12.59 incl. VAT
Osborn HPD-SUS HSS Vanadium TiN Coated (Stainless)Stub Drill
- High helix-sharp cutting edges to avoid built-up and to be suitable for high performance drilling.
- Wide flute and stub length-increasing chip removal and reducing vibration and deflection.
- High vanadium HSS-EX material with superior TiN coating - higher speed and feed, longer service life.
- High quality-good surface finishes, high productivity
Designed for drilling in stainless steels, mild steels, aluminium, aluminium alloy, aluminium die cast, copper alloy etc.
£5.84 excl. VAT
£7.01 incl. VAT
Osborn 888301 HSS 118 Degree Imperial BS Centre Drill
For machining steels, stainless steel, cast iron, titanium, aluminium and plastics.
- High Speed Steel
- Uncoated
- Point angle 118 degree
- British standard.
- Straight Shank Centre Drill
£1.39 excl. VAT
£1.67 incl. VAT
Osborn HPD-SUS Vanadium TiN Coated (Stainless) 5xD Drill
- High helix-sharp cutting edges to avoid built-up and to be suitable for high performance drilling
- Reinforced web and Jobbers length-increasing rigidity and suitable for 4D-5D drilling
- High vanadium HSS-EX material with superior TiN coating - higher speed and feed, longer service life
- High quality-good surface finishes, high productivity and weeding second operation
Designed for 4D-5D drilling in stainless steels, mild steels, aluminium, aluminium alloy, aluminium die cast, copper, copper alloy etc.
£6.73 excl. VAT
£8.08 incl. VAT
Osborn 702302 HSS Co8 3 Flute 90 Degree Countersink (Europa)
For machining steels, hardened steel, stainless steel, cast iron, titanium, nickel, copper, brass and aluminium.
- For producing countersinks for cap screws.
- Self centering and chatter free.
- Can be used for chamfering
- DIN 335C
£9.70 excl. VAT
£11.64 incl. VAT
HSS-E Straight Shank Chucking Reamer Straight Flute Osborn
- For machining steel, stainless steel, cast iron and non-ferrous materials
- OD tolerance H7
- Shank diameter tolerance h8
- Right hand cutting
- HSS 8% cobalt
£13.99 excl. VAT
£16.79 incl. VAT
£12.22excl. VAT
£14.66incl. VAT
Osborn 820902 HSS Co8 8% Cobalt Long Series Straight Shank Drill
Features:
- 8% cobalt
- H8 Tolerance
- Straight Shank Drill
- Point angle 135 Degree
- DIN334
- Long Series
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
-metric-centre-drill-din333a.jpg&w=640&q=75)
Osborn 810334 HSS-Ex 60 degree (form A) Metric Centre Drill - DIN333A
For machining steels, stainless steel, cast iron, titanium, aluminium and plastics.
Osborn 820801 Goldex HSS Steam Tempered General Purpose Jobber Drill Sets
- Self Centring
- 118 Degree Split Point
- Titanium Nitride (TiN) Coated
- Special flute geometry for increased chip evacuation and reduced vibration
£26.99 excl. VAT
£32.39 incl. VAT
Osborn 810504 Goldex HSS Jobber General Purpose Drill Sets
High performance self-centring HSS goldex jobber drills with Titanium Nitride (TiN) coating on the working part of the drill. Long tool life on materials including steel alloyed and non-alloyed cast steel cast iron grey cast iron titanium aluminium graphite and malleable cast iron.
£56.53 excl. VAT
£67.84 incl. VAT
Osborn 702301 HSS 3 Flute 90 Degree Countersink (Europa)
Features:
- For producing countersinks for cap screws
- Self centering and chatter free
- Can be used for chamfering
- DIN 345
For machining steels, hardened steel, stainless steel, cast iron, titanium, nickel, copper, brass and aluminium.
£7.90 excl. VAT
£9.48 incl. VAT
Metric Coarse HSSE Spiral Flute Machine Tap for Aluminium - Osborn
- The Blue Ring HSSE machine tap is our first choice for aluminium and aluminium alloys
- The 45° helix angle ensures excellent chip evacuation
- Metric Coarse (MC) thread form
- Spiral Flute
- Sizes available M2 to M20
£6.72 excl. VAT
£8.06 incl. VAT
Osborn 811505 Goldex HSS-E Jobber Drill Worm Pattern
Features:
- Bright finish body and worm pattern for maximum chip clearance
- Self centring split point
- TiN coated on working area for longer tool life
- Designed for drilling deep holes in steel, stainless steel, cast iron, titanium and aluminium.
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
£4.30 excl. VAT
£5.16 incl. VAT
Osborn 810205 HPD HSS Premium Cobalt Tin Coated 5xd Jobber Drill
£6.89 excl. VAT
£8.27 incl. VAT
Osborn 810505 Goldex HSSCo8 Jobber General Purpose Drill Sets
High performance self-centring HSS goldex jobber drills with Titanium Nitride (TiN) coating on the working part of the drill. Long tool life on materials including steel alloyed and non-alloyed cast steel cast iron grey cast iron titanium aluminium graphite and malleable cast iron.
£101.17 excl. VAT
£121.40 incl. VAT
Metric Coarse HSSE Spiral Point Machine Tap for Aluminium - Osborn
- The Blue Ring HSSE machine tap is our first choice for aluminium and aluminium alloys
- The 45° helix angle ensures excellent chip evacuation
- Metric Coarse (MC) thread form
- Spiral Point
- Sizes available M2 to M20
£7.41 excl. VAT
£8.89 incl. VAT