High Performance Indexable Drilling Systems

QXF 2xD Indexable Drilling System (Europa)

• 1 insert style for the central and peripheral 
• 2xD
• 4 cutting edges on the insert (SPMX style)
• Inserts suitable for steel, stainless steel, cast iron, heat resistant alloys and heat resistant alloys 
• through coolant 

QXF 3xD Indexable Drilling System (Europa)

• 1 insert style for the central and peripheral 
• 3xD
• 4 cutting edges on the insert (SPMX style)
• Inserts suitable for steel, stainless steel, cast iron, heat resistant alloys and heat resistant alloys 
• through coolant

QXF 4xD Indexable Drilling System (Europa)

• 1 insert style for the central and peripheral 
• 4xD
• 4 cutting edges on the insert (SPMX style)
• Inserts suitable for steel, stainless steel, cast iron, heat resistant alloys and heat resistant alloys 
• through coolant

QXF 5xD Indexable Drilling System (Europa)

• 1 insert style for the central and peripheral 
• 5xD
• 4 cutting edges on the insert (SPMX style)
• Inserts suitable for steel, stainless steel, cast iron, heat resistant alloys and heat resistant alloys 
• through coolant

SPMX U-Drill Inserts General Purpose (Europa)

• 4 cutting edges
• Grades suitable for general purpose machining 
• For use in QXF series U-drills
• Through coolant
• Grade ET602 for steel, stainless steel, cast iron and non-ferrous machining
• Grade ET63P for stainless steel, heat resistant alloys and some steel
• Grade ET73P for steel and hardened steels

SPMX U-Drill Inserts For Stainless Steel & HRSA's (Europa)

• 4 cutting edges
• Sharp geometry for Stainless Steel and HRSA
• For use in QXF series U-drills 

• Optimised edge design for stable operation with new chip breaker geometry
• Special grades for outer and inner insert for more efficiency by different materials
• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

Please contact us for the offer to be applied

The benfits of the 4xD indexable drilling bodies from ZCC-CT are:

• Optimised edge design for stable operation with new chip breaker geometry
• Special grades for outer and inner insert for more efficiency by different materials
• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

Please contact us for the offer to be applied

• Optimised edge design for stable operation with new chip breaker geometry
• Special grades for outer and inner insert for more efficiency by different materials
• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

• Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
• Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
• ap· d.o.c. = 1~4(mm)
• f= 0.2~0.5(mm/r)

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

• Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
• Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
• ap· d.o.c. = 1~4(mm)
• f= 0.2~0.5(mm/r)

The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

• Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
• Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
• ap· d.o.c. = 1~4(mm)
• f= 0.2~0.5(mm/r)

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

• Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
• Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
• ap· d.o.c. = 1~4(mm)
• f= 0.2~0.5(mm/r)

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.

The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.

It is used with the ZSD Series indexable drill bodies.

The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.

The benefits of using SPMX inserts from ZCC-CT are:

• Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
• Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
• ap· d.o.c. = 1~4(mm)
• f= 0.2~0.5(mm/r)

This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.

The special LM chip breaker series is used for steel and stainless steel.