Water-based Soluble Coolants, Lubricants & Cutting Fluids

MTO Runcool Premium Semi-Synthetic Cutting Fluid

• Compatible with most water qualities up to 400ppm calcium carbonate
• Highly resistant to bacterial and fungal degradation
• Excellent corrosion inhibition to ferrous metals
• Chlorine, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability
• Extremely low foaming tendency

MTO Runsol Whitewater EP Water Soluble Cutting Fluid

• High oil content.
• Exceptional cooling properties.
• Good anti-corrosion inhibition to ferrous metals.
• EP additives ensure good tool cutting and high quality surface finish.
• Boron, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability.

MTO Runcool 431AF Semi-Synthetic Cutting Fluid  

• Contains specially developed silicone-free anti-foam additives to overcome foaming in high-pressure systems using soft or de-ionised water.
• Forms a translucent micro emulsion in most waters.
• Compatible with most water qualities up to 400ppm calcium carbonate.
• Highly resistant to bacterial and fungal degradation, giving freedom from bad smells or slimy deposits.
• Offers good corrosion inhibition to ferrous metals.
• Good resistance to contact corrosion thus allowing work pieces to be stacked without staining.
• Chlorine, nitrite, phenol and formaldehyde free and based on highly refined mineral oil, thus giving optimum operator acceptability.
• Creates minimal sticky residues that can easily be washed away with water.

MTO Runcool Ultra Semi-Synthetic Cutting Fluid

• Outstanding lubricity and extreme pressure properties.
• Based on highly developed synthetic ester technology.
• Chlorine-free.
  • Free from secondary amines, nitrites and phenols for the most stringent health and safety requirements.
• Low staining potential on aluminium and its alloys.
• Widely used for aerospace applications.
• Forms a stable milky emulsion in waters up to 400ppm CaCO3 hardness.
• Outstanding resistance to bacterial and fungal degradation.
• Good rejection of tramp oil.
• Low foaming characteristics, achieved with only silicone free anti-foams.
• Found to be particularly effective in preventing rusting when machining cast iron.

Benefits:

• In accordance with REACH
• Low Boron content
• Reduced maintenance cost
• Excellent foam properties
• Increase tool life
• Guaranteed surface finish especially on aluminium alloys

A semi-synthetic medium to hard water high performance coolant.

Benefits

• Outstanding sump life
• Superior corrosion protection
• Multi-metal compatible
• Medium-hard water tolerant
• Extremely hard water tolerant
• Excellent tramp oil rejection
• Low foaming
• Chlorine, biocide free
• High operator acceptance
• Clear running on cast iron
• Non-staining on aluminium alloys

RUNCOOL ECO 2425 is a biocide-free, soft to medium water, high lubricity micro-emulsion coolant. This chlorine free metalworking fluid will perform extremely well on multi-metal applications and is machine tool friendly with extremely low foaming properties

MTO Runcool ECO 4778 Semi Sytnthetic Cutting Fluid For Soft Water 

• Outstanding sump life
• Superior corrosion protection
• Multi-metal compatible
• Medium – soft water tolerant
• Excellent tramp oil rejection
• Low foaming
• Chlorine, biocide free
• High operator acceptance
• Clear running on cast iron
• Non-staining on aluminium alloys

Millersol EP Semi-Synthetic Metalworking Fluid (Millers Oils)

• Low-foaming to provide consistent lubrication and heat removal
• EP additives ensure excellent cutting performance and surface finish even in very arduous applications
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol EP is a semi-synthetic, formaldehyde-free metalworking fluid designed for very arduous applications where EP additives are required.

Millersol EP is recommended for use on a variety of steel and aluminium alloys as well as yellow metals.

Millersol HW Semi-Synthetic Metalworking Fluid For Hard Water Applications (Millers Oils)

• High level of lubricity additives ensures excellent cutting performance and surface finish
• Low foaming formulation and excellent emulsion stability in hard water areas provides consistent lubrication and heat removal, even in high pressure through-spindle coolant systems
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Chlorine-free and formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol HW is a semi-synthetic, formaldehyde-free metalworking fluid, designed for severe machining operations even in hard water areas.

Millersol HW is recommended for use on ferrous alloys, aluminium alloys and yellow metals.

Millersol LF Semi-Synthetic Metalworking Fluid (Millers Oils) 

• Extremely low-foaming even in high pressure systems and soft water areas, to provide consistent lubrication and heat removal
• High level of lubricity additives ensures excellent cutting performance and surface finish
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Chlorine-free and formaldehyde-free, ensuring minimised hazard labelling for operator safety and audit compliance

Millersol LF is a semi-synthetic, formaldehyde-free metalworking fluid, designed for severe machining operations where a low foaming product is required.

Millersol LF is recommended for use on ferrous alloys including stainless steel and titanium, aluminium alloys and yellow metals.

Millersol MP Low Oil Semi-Synthetic Metalworking Fluid (Millers Oils)

• Optimised lubricity and cooling properties ensure quality work piece finish and longer tool life
• Low foaming formulation provides consistent lubrication and heat removal in both hard and soft water
• Robust formulation extends sump life, resulting in both economical fluid consumption and reduced down-time
• Multi-metal compatibility allows product rationalisation for subcontractor flexibility as well as simplified ordering and stock holding
• Chlorine and formaldehyde-free formulation ensures minimised hazard labelling for operator safety and audit compliance

Millersol MP is a semi-synthetic, low oil formaldehyde-free metalworking fluid, designed to perform a wide range of cutting and grinding operations across a variety of materials.

Millersol MP is recommended for use on cast iron, ferrous alloys, aluminium alloys, yellow metals and glass. 

Millersol TS Soluble Metal Working Fluid (Millers Oils)

• High level of oil and lubricity additives ensures excellent cutting performance and surface finish
• Tight emulsion results in stable formulation for extended sump life, resulting in both economical fluid consumption and reduced down-time
• Formaldehyde-free, for minimised hazard labelling for operator safety and audit compliance
• Free from chlorine, zinc and heavy metals

Millersol TS is a traditional soluble metalworking fluid with high oil content for enhanced lubricity and corrosion protection during the machining of both ferrous and non-ferrous metals. Millersol TS is free from formaldehyde-release biocides.

Millersol TS is recommended for use on ferrous alloys, aluminium alloys and yellow metals.