Filter by:
Deals
Application
Substrate
Diameter
Radius
Shank Diameter
Cutting Length
Overall Length
No. Flutes
Profile
Length
Range
Nano Mill - Carbide Milling Cutters for All Applications
Max-Mill TiAlN Coated Carbide 4 Flute Long Length End Mill
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
£15.23ex VAT
£18.28 inc VAT
£15.21! ex VAT
£18.25 inc VAT
3 Flute Long Length End Mill For Aluminium LAE Series
ALI-MAX Solid Carbide 3 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
NANO-MILL JE Series Coated Carbide 4 Flute Square End Mill
Max-Mill Coated Carbide 4 Flute End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£8.28ex VAT
£9.94 inc VAT
£3.65! ex VAT
£4.38 inc VAT
Solid Carbide 2 Flute Slot Drill for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Slot Drill from Nano-Mill
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
- Ideal for aluminium and non-ferrous machining
£7.40ex VAT
£8.88 inc VAT
£3.80! ex VAT
£4.56 inc VAT
Solid Carbide 3 Flute End Mill for Machining Aluminium
ALI-MAX Solid Carbide 3 Flute End Mill from Nano-Mill
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
- Ideal for aluminium and non-ferrous machining
£8.23ex VAT
£9.88 inc VAT
£4.41! ex VAT
£5.29 inc VAT
NANO-MILL Coated Carbide 4 Flute Ball Nose End Mill
Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£9.79ex VAT
£11.75 inc VAT
£49.02! ex VAT
£58.82 inc VAT
NANO-MILL Max-Mill JEF Series Coated Carbide 3 Flute Square End Mill
Max-Mill Coated Carbide 3 Flute End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill
Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£21.77ex VAT
£26.12 inc VAT
£66.89! ex VAT
£80.27 inc VAT
NANO-MILL Max-Mill JER Series Coated Carbide 4 Flute Corner Radius End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
2 Flute Long Length End Mill for Aluminium LAE Series
ALI-MAX Solid Carbide 2 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
Max-Mill TiAlN Coated Carbide 2 Flute Long Length End Mill
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
£15.23ex VAT
£18.28 inc VAT
£8.71! ex VAT
£10.45 inc VAT
NANO-MILL JE Series Coated Carbide 2 Flute Square Slot Drill
Max-Mill Coated Carbide 2 Flute End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£8.28ex VAT
£9.94 inc VAT
£2.63! ex VAT
£3.16 inc VAT
NANO-MILL Max-Mill JLR Series Coated Carbide 4 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
NANO-MILL Max-Mill JNR Series Coated Carbide 2 Flute Corner Radius End Mill
Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£9.94ex VAT
£11.93 inc VAT
£3.57! ex VAT
£4.28 inc VAT
NANO-MILL Ali-Max AB**02 Series 2 Flute Ball Nose Solid Carbide End Mill for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Ball Nose End Mill from Nano-Mill is 1st choice for machining aluminium and non ferrous material, giving superior surface finish. The special Hi-Helix geometry enables better chip removal.
NANO-MILL Max-Mill JIB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 75mm OAL
NANO-MILL Max-Mill JLNR Series Coated Carbide 2 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 2 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£13.50ex VAT
£16.20 inc VAT
£5.82! ex VAT
£6.98 inc VAT
