Expert advice available from time served engineers.
Click to view our current special offers.
We offer free carriage on all orders over £39 to mainland UK.
Click to view our current special offers.
Chat with us either by phone, online or email.
Click to view our current special offers.

Milling Cutters for Machining Hardened Steel

Banner image highlighting some of the products in this category.
Image of a JELF series 4 flute end mill milling cutter

Max-Mill TiAlN Coated Carbide 4 Flute Long Length Milling Cutters

Series: JELF**04
  • Solid Micrograin Carbide
  • TiALN coated
  • Suitable for machining upto 55HRC
  • Can be used for wet and dry cutting
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Starting From:
£15.23 excl. VAT
£18.28 incl. VAT

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank

ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters

Series: HM-4E

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£15.68 excl. VAT
£18.82 incl. VAT
Offer Price From:
£13.33excl. VAT
£16.00incl. VAT
15% DISCOUNT

Max-Mill JE Series Coated Carbide 4 Flute Square End Mill

Max-Mill TIALN Coated Carbide 4 Flute Milling Cutters

Series: JE**04

Max-Mill Coated Carbide 4 Flute End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

Image of product.

ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters

Series: HM-2BP

ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£23.53 excl. VAT
£28.24 incl. VAT
Offer Price From:
£20.00excl. VAT
£24.00incl. VAT
15% DISCOUNT

Max-Mill JB Series TiAlN Coated Carbide 4 Flute Ball Nose End Mill

Max-Mill 4 Flute Coated Carbide Ball Nose Milling Cutters

Series: JB**04

Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£9.79 excl. VAT
£11.75 incl. VAT

Max-Mill JEF Series Coated Carbide 3 Flute Square End Mill

Max-Mill Series 3 Flute Coated Carbide Milling Cutters

Series: JEF**03

Max-Mill Coated Carbide 3 Flute End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

Max-Mill Coated Carbide 4 Flute Roughing End Mill

NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill

Series: JWA**04

Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£21.77 excl. VAT
£26.12 incl. VAT

ZCC-CT HM-6E 6 Flute End Mill with Straight Shank

ZCC-CT HM-6E Series 6 Flute End Mill with Straight Shank for Hardened Steel Machining

Series: HM-6E

ZCC-CT HM-6E 6 Flute End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£28.21 excl. VAT
£33.85 incl. VAT
Offer Price From:
£23.98excl. VAT
£28.78incl. VAT
15% DISCOUNT

Max-Mill Coated Carbide 4 Flute Corner Radius End Mill

NANO-MILL Max-Mill JER Series Coated Carbide 4 Flute Corner Radius End Mill

Series: JER****

Max-Mill Coated Carbide 4 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£9.94 excl. VAT
£11.93 incl. VAT

Max-Mill Coated Carbide 2 Flute Ball Nose Long Length End Mill.

NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill

Series: JJB**02

Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£22.29 excl. VAT
£26.75 incl. VAT

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining

ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining

Series: HM-2BL

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£41.17 excl. VAT
£49.40 incl. VAT
Offer Price From:
£34.99excl. VAT
£41.99incl. VAT
15% DISCOUNT

Pulsar Blue 108350 Series 6 Flute 45 Degree Helix Corner Radius End Mill.

Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel

Series: 108350

Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel

  • Premium nanograin carbide
  • Suitable for dry cutting
  • Corner radius
  • Suitable for machining upto 70HRC
  • High speed cutting
  • 45 degree helix
  • Excellent workpiece finish
Starting From:
£47.08 excl. VAT
£56.50 incl. VAT
Offer Price From:
£40.02excl. VAT
£48.02incl. VAT
15% DISCOUNT

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck.

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel

Series: HM-2EP

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£21.33 excl. VAT
£25.60 incl. VAT
Offer Price From:
£18.13excl. VAT
£21.76incl. VAT
15% DISCOUNT

Max-Mill JB Series Coated Carbide 2 Flute Ball Nose End Mill

NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill

Series: JB**02

Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£8.88 excl. VAT
£10.66 incl. VAT

Max-Mill JELF Series TiAlN Coated Carbide 2 Flute Long Length End Mill

Max-Mill TiAlN Coated Carbide 2 Flute Long Length End Mill

Series: JELF**02
  • Solid Micrograin Carbide
  • TiALN coated
  • Suitable for machining upto 55HRC
  • Can be used for wet and dry cutting
  • Centre cutting
Starting From:
£15.23 excl. VAT
£18.28 incl. VAT

ZCC-CT 4 Flute Long Length End Mill

ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel

Series: HM-4EL

ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£24.81 excl. VAT
£29.77 incl. VAT
Offer Price From:
£21.09excl. VAT
£25.31incl. VAT
15% DISCOUNT

Max-Mill JE Series Coated Carbide 2 Flute Square End Mill

NANO-MILL JE Series Coated Carbide 2 Flute Square Slot Drill

Series: JE**02

Max-Mill Coated Carbide 2 Flute End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

ZCC-CT HM-4R 4 Flute Corner Radius End Mill with Straight Shank.

ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel

Series: HM-4R

ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£22.64 excl. VAT
£27.17 incl. VAT
Offer Price From:
£19.24excl. VAT
£23.09incl. VAT
15% DISCOUNT

ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank

ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel

Series: HM-4B

ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
Starting From:
£28.84 excl. VAT
£34.61 incl. VAT
Offer Price From:
£24.51excl. VAT
£29.41incl. VAT
15% DISCOUNT

Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill

NANO-MILL Max-Mill JLR Series Coated Carbide 4 Flute Corner Radius Long Length End Mill

Series: JLR****

Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£13.23 excl. VAT
£15.88 incl. VAT

Max-Mill Coated Carbide 2 Flute Corner Radius End Mill

NANO-MILL Max-Mill JNR Series Coated Carbide 2 Flute Corner Radius End Mill

Series: JNR****

Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£9.94 excl. VAT
£11.93 incl. VAT

ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank

ZCC-CT HM-2ES Series 2 Flute Micro Diameter End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2ES

ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
  • Starting at 0.3mm diameter
Starting From:
£13.31 excl. VAT
£15.97 incl. VAT
Offer Price From:
£11.31excl. VAT
£13.57incl. VAT
15% DISCOUNT

Pulsar Blue 103350 Series 4 Flute Reduced Neck Corner Radius End Mill.

Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel

Series: 103350

Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel

  • Premium nanograin carbide
  • Suitable for dry cutting
  • Corner radius
  • Suitable for machining upto 70HRC
  • High speed cutting
  • 30 degree helix
  • Excellent workpiece finish

 

Starting From:
£22.44 excl. VAT
£26.93 incl. VAT
Offer Price From:
£19.07excl. VAT
£22.88incl. VAT
15% DISCOUNT

Max-Mill Coated Carbide 2 Flute Ball Nose Long Length End Mill

NANO-MILL Max-Mill JIB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 75mm OAL

Series: JIB**02
Max-Mill Coated Carbide 2 Flute Long Length Ball Nose End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
Starting From:
£15.24 excl. VAT
£18.29 incl. VAT