Expert advice available from time served engineers.
Click to view our current special offers.
We offer free carriage on all orders over £39 to mainland UK.
Click to view our current special offers.
Chat with us either by phone, online or email.
Click to view our current special offers.

End Mills & Slot Drills for General Purpose Applications

Banner image highlighting some of the products in this category.
Image of an E454 series 4 flute end mill milling cutter.

Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters

Series: E454

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 25mm
Image indicating the E454 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E454 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE

Image of a JELF series 4 flute end mill milling cutter

Max-Mill TiAlN Coated Carbide 4 Flute Long Length Milling Cutters

Series: JELF**04
  • Solid Micrograin Carbide
  • TiALN coated
  • Suitable for machining upto 55HRC
  • Can be used for wet and dry cutting
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Starting From:
£15.23 excl. VAT
£18.28 incl. VAT

Image of an E453 series 3 flute end mill milling cutter

Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters

Series: E453

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Image indicating the E453 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E453 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE

Image of product.

HSC Series 2 Flute Tialn Coated HSS Milling Cutters

Series: HSC2
  • 2 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE

HSC Series 3 Flute Tialn Coated HSS Milling Cutters

Series: HSC3
  • 3 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE

HSCR Series Tialn Coated Fine Pitch Roughing HSS Milling Cutters

Series: HSCR
  • 3 & 4 flute HSSE end mill ripper
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£21.46 excl. VAT
£25.75 incl. VAT
Buy 2 Get 1 FREE

HSC Series 4 Flute Tialn Coated HSS Milling Cutters

Series: HSC4
  • 4 flute HSSE end mill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE

Max-Mill JE Series Coated Carbide 4 Flute Square End Mill

Max-Mill TIALN Coated Carbide 4 Flute Milling Cutters

Series: JE**04

Max-Mill Coated Carbide 4 Flute End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

STARKE ECO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill.

Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters

Series: EB452

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Available diameter sizes between 1mm and 20mm
Image indicating the EB452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the EB452 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE

Image of product.

PM75E Series High Performance Powder Metal 4 Flute Milling Cutters

Series: PM75E

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

  • Multiple helix technology for reduced vibration
  • Excellent performance in unstable machining conditions
  • Higher cutting speed than equivalent HSSCo tools
  • Reduced chatter
  • Improved tool harmonics
  • Exceptional performance in unstable cutting conditions
  • Increased chip flow
Starting From:
£9.05 excl. VAT
£10.86 incl. VAT

Clarkson PM75 Multiple Helix High Performance Powder Metal Fine Pitch Ripper

PM75S Series High Performance Powder Metal Fine Pitch Ripper

Series: PM75S

Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

  • Multiple helix technology for reduced vibration
  • Excellent performance in unstable machining conditions
  • Higher cutting speed than equivalent HSSCo tools
  • Reduced chatter
  • Improved tool harmonics
  • Exceptional performance in unstable cutting conditions
  • Increased chip flow
Starting From:
£19.01 excl. VAT
£22.81 incl. VAT

Max-Mill JB Series TiAlN Coated Carbide 4 Flute Ball Nose End Mill

Max-Mill 4 Flute Coated Carbide Ball Nose Milling Cutters

Series: JB**04

Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£9.79 excl. VAT
£11.75 incl. VAT

Max-Mill JEF Series Coated Carbide 3 Flute Square End Mill

Max-Mill Series 3 Flute Coated Carbide Milling Cutters

Series: JEF**03

Max-Mill Coated Carbide 3 Flute End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

STARKE Eco-Mill Coated Carbide 2 Flute End Mill.

Eco-Mill 2 Flute Coated Solid Carbide Slot Drill

Series: E452

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm to 20mm
Image indicating the E452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E452 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE

Max-Mill Coated Carbide 4 Flute Roughing End Mill

NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill

Series: JWA**04

Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£21.77 excl. VAT
£26.12 incl. VAT

Image of product.

STARKE Coated Carbide 4 Flute Roughing End Mill

Series: PR554
  • Cut up to 55 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Available diameter sizes between 6mm and 20mm
Starting From:
£13.73 excl. VAT
£16.48 incl. VAT
Buy 2 Get 1 FREE

Max-Mill Coated Carbide 4 Flute Corner Radius End Mill

NANO-MILL Max-Mill JER Series Coated Carbide 4 Flute Corner Radius End Mill

Series: JER****

Max-Mill Coated Carbide 4 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£9.94 excl. VAT
£11.93 incl. VAT

Max-Mill Coated Carbide 2 Flute Ball Nose Long Length End Mill.

NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill

Series: JJB**02

Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£22.29 excl. VAT
£26.75 incl. VAT

Max-Mill JB Series Coated Carbide 2 Flute Ball Nose End Mill

NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill

Series: JB**02

Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£8.88 excl. VAT
£10.66 incl. VAT

Max-Mill JELF Series TiAlN Coated Carbide 2 Flute Long Length End Mill

Max-Mill TiAlN Coated Carbide 2 Flute Long Length End Mill

Series: JELF**02
  • Solid Micrograin Carbide
  • TiALN coated
  • Suitable for machining upto 55HRC
  • Can be used for wet and dry cutting
  • Centre cutting
Starting From:
£15.23 excl. VAT
£18.28 incl. VAT

Image of product.

Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill

Series: 105102

Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill 

  • HSS 8% cobalt
  • Uncoated 
  • Weldon shank
  • Suitable for a wide range of materials
Starting From:
£7.12 excl. VAT
£8.54 incl. VAT

Max-Mill JE Series Coated Carbide 2 Flute Square End Mill

NANO-MILL JE Series Coated Carbide 2 Flute Square Slot Drill

Series: JE**02

Max-Mill Coated Carbide 2 Flute End Mill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill

NANO-MILL Max-Mill JLR Series Coated Carbide 4 Flute Corner Radius Long Length End Mill

Series: JLR****

Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£13.23 excl. VAT
£15.88 incl. VAT

Max-Mill Coated Carbide 2 Flute Corner Radius End Mill

NANO-MILL Max-Mill JNR Series Coated Carbide 2 Flute Corner Radius End Mill

Series: JNR****

Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£9.94 excl. VAT
£11.93 incl. VAT