Ball Nose Milling Cutters, End Mills and Slot Drills
Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£23.53 excl. VAT
£28.24 incl. VAT
Max-Mill 4 Flute Coated Carbide Ball Nose Milling Cutters
Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£9.79 excl. VAT
£11.75 incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£22.29 excl. VAT
£26.75 incl. VAT
ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£41.17 excl. VAT
£49.40 incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£8.88 excl. VAT
£10.66 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£28.84 excl. VAT
£34.61 incl. VAT
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.70 excl. VAT
£26.04 incl. VAT
NANO-MILL Ali-Max AB**02 Series 2 Flute Ball Nose Solid Carbide End Mill for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Ball Nose End Mill from Nano-Mill is 1st choice for machining aluminium and non ferrous material, giving superior surface finish. The special Hi-Helix geometry enables better chip removal.
£9.55 excl. VAT
£11.46 incl. VAT
NANO-MILL Max-Mill JIB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 75mm OAL
£15.24 excl. VAT
£18.29 incl. VAT
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£33.64 excl. VAT
£40.37 incl. VAT
CLARKSON HSS Co8 2 Flute Ball Nose Slot Drill
CLARKSON HSS Co8 2 Flute Ball Nose Slot Drill
- HSS 8% cobalt
- uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£11.94 excl. VAT
£14.33 incl. VAT
FRANKEN Top-Cut Extra Long Length High Performance Ball Nosed End Mill
FRANKEN Top-Cut Extra Long Length High Performance Ball Nosed End Mill
- Solid micrograin carbide
- TiALN coated
- Extra long
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£44.94 excl. VAT
£53.93 incl. VAT
CLARKSON TiALN HSS Co8 2 Flute Long Length Ball Nose Slot Drill
CLARKSON TiALN HSS Co8 2 Flute Long Length Ball Nose Slot Drill
- HSS 8% cobalt
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£36.10 excl. VAT
£43.32 incl. VAT
FRANKEN Top-Cut High Performance Ball Nosed End Mill
FRANKEN Top-Cut High Performance Ball Nosed End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£31.46 excl. VAT
£37.75 incl. VAT
ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£33.18 excl. VAT
£39.82 incl. VAT
Clarkson 2 Flute HSS Co8 Weldon Shank Long Length Slot Drill
Clarkson 2 Flute HSS Co8 Weldon Shank Long Length Slot Drill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£31.82 excl. VAT
£38.18 incl. VAT
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£41.17 excl. VAT
£49.40 incl. VAT
NANO-MILL Max-Mill JKB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 150mm OAL
£33.65 excl. VAT
£40.38 incl. VAT
CLARKSON HSS Co8 4 Flute Ball Nose End Mill
CLARKSON HSS Co8 4 Flute Ball Nose End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£15.84 excl. VAT
£19.01 incl. VAT
MasterMill VX Series 4 Flute High Performance Ball Nosed End Mill
MasterMill VX 170329 Series 4 Flute High Performance Ball Nosed End Mill
- Solid micrograin carbide
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coated
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£22.01 excl. VAT
£26.41 incl. VAT
Pulsar Blue 2 Flute Rib Processing Ball Nose Micro End Mill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Ball Nosed Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£39.42 excl. VAT
£47.30 incl. VAT
Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel
Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£45.82 excl. VAT
£54.98 incl. VAT
Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel
Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£39.32 excl. VAT
£47.18 incl. VAT