3 Flute Slot Drill and End Mills
Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
HSC Series 3 Flute Tialn Coated HSS Milling Cutters
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
Ali-Max 3 Flute Long Length Milling Cutters For Aluminium
ALI-MAX Solid Carbide 3 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
£17.32 excl. VAT
£20.78 incl. VAT
Ali-Max 3 Flute Solid Carbide Milling Cutters for Machining Aluminium
ALI-MAX Solid Carbide 3 Flute End Mill from Nano-Mill
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
- Ideal for aluminium and non-ferrous machining
£8.23 excl. VAT
£9.88 incl. VAT
Alu-Cut 2544K Series 2 & 3 Flute Long Length Milling Cutters
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- GLT coated for improved tool life, works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£38.73 excl. VAT
£46.48 incl. VAT
Max-Mill Series 3 Flute Coated Carbide Milling Cutters
Max-Mill Coated Carbide 3 Flute End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£8.28 excl. VAT
£9.94 incl. VAT
FRANKEN Alu-Cut 2544 Series 2 & 3 Flute Long Length End mill
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£28.86 excl. VAT
£34.63 incl. VAT
FRANKEN 4 Flute Solid Carbide Corner Radius End Mill
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£21.95 excl. VAT
£26.34 incl. VAT
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£15.37 excl. VAT
£18.44 incl. VAT
Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium
Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£10.25 excl. VAT
£12.30 incl. VAT
FRANKEN 3 Flute High Performance Short Length End Mill
FRANKEN Top-Cut 3 Flute High Performance Short Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£13.69 excl. VAT
£16.43 incl. VAT
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
Clarkson 3 Flute HSS Co8 Weldon Shank Long Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£7.12 excl. VAT
£8.54 incl. VAT
FRANKEN 3 Flute High Performance Long Length End Mill
FRANKEN Top-Cut 3 Flute High Performance Long Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£19.25 excl. VAT
£23.10 incl. VAT
Clarkson 3 Flute HSS Co8 Threaded Shank End Mill
Clarkson 3 Flute HSS Co8 Threaded Shank End Mill
- HSS 8% cobalt
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£8.78 excl. VAT
£10.54 incl. VAT
CLARKSON HSS Co8 3 Flute Long Length Threaded Shank End Mill
CLARKSON Series HSS Co8 3 Flute Long Length Threaded Shank End Mill
- HSS 8% cobalt
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£11.23 excl. VAT
£13.48 incl. VAT
CLARKSON HSS CO8 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium
CLARKSON HSS CO8 3 Flute 37 Degree Helix Coarse Pitch Ripper For Aluminium
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for aluminium and non-ferrous materials
£27.46 excl. VAT
£32.95 incl. VAT
Alu-XP 142303 Series 3 Flute Carbide Corner Radius End Mill for Aluminium & Non-Ferrous Machining
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£12.63 excl. VAT
£15.16 incl. VAT
Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel
Pulsar Blue 3 Flute Ball Nose End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£45.82 excl. VAT
£54.98 incl. VAT
Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel
Pulsar Blue 4 Flute Ball Nose End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£39.32 excl. VAT
£47.18 incl. VAT
ALU-XP 155303 2 Flute Extended Neck 30 Degree Helix Corner Radius End Mill for Aluminium
£20.29 excl. VAT
£24.35 incl. VAT
FRANKEN 3 Flute Carbide Ripper For Aluminium
Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
- High performance tool.
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Plain Shank
£49.67 excl. VAT
£59.60 incl. VAT
FRANKEN 3 Flute Coated Carbide Ripper for Aluminium
Franken Alu-Cut solid carbide roughing end mills for high performance machining of aluminium, wrought aluminium alloys and aluminium alloys with a silicon content of up to 7%.
- High performance tool.
- GLT coated for improved tool life works in copper alloys in addition to aluminium
- Special geometry for the machining of aluminium
- Centre cutting
- 3 Flute Ripper
- Plain Shank
£59.24 excl. VAT
£71.09 incl. VAT
6MM HSS CO8% 3 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£21.46 excl. VAT
£25.75 incl. VAT