Milling Cutters
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£28.84 excl. VAT
£34.61 incl. VAT
NANO-MILL Max-Mill JLR Series Coated Carbide 4 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£13.23 excl. VAT
£15.88 incl. VAT
NANO-MILL Max-Mill JNR Series Coated Carbide 2 Flute Corner Radius End Mill
Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£9.94 excl. VAT
£11.93 incl. VAT
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£4.85 excl. VAT
£5.82 incl. VAT
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.70 excl. VAT
£26.04 incl. VAT
Alu-XP 2 Flute Carbide Slot Drill for Aluminium
Alu-XP 2 Flute Carbide Slot Drill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
£10.10 excl. VAT
£12.12 incl. VAT
NANO-MILL Ali-Max AB**02 Series 2 Flute Ball Nose Solid Carbide End Mill for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Ball Nose End Mill from Nano-Mill is 1st choice for machining aluminium and non ferrous material, giving superior surface finish. The special Hi-Helix geometry enables better chip removal.
£9.55 excl. VAT
£11.46 incl. VAT
ZCC-CT HM-2ES Series 2 Flute Micro Diameter End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
- Starting at 0.3mm diameter
£13.31 excl. VAT
£15.97 incl. VAT
Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£22.44 excl. VAT
£26.93 incl. VAT
NANO-MILL Max-Mill JIB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 75mm OAL
£15.24 excl. VAT
£18.29 incl. VAT
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£33.64 excl. VAT
£40.37 incl. VAT
Clarkson HSS Co8 Long Length Threaded Shank End Mill
Clarkson HSS Co8 Long Length Threaded Shank End Mill
- HSS 8% cobalt
- 4-8 flutes
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£7.22 excl. VAT
£8.66 incl. VAT
CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill
CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill
- HSS 8% cobalt
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£6.38 excl. VAT
£7.66 incl. VAT
ZCC-CT UM-4R 4 Flute Corner Radius Variable Helix End Mill
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£22.26 excl. VAT
£26.71 incl. VAT
FRANKEN Extra Long Length High Performance End Mill 4XD
FRANKEN Extra Long Length High Performance End Mill 4XD
- Solid micrograin carbide
- TiALN coated
- Extra long (4XD)
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£43.42 excl. VAT
£52.10 incl. VAT
2 Flute Corner Radius Long Length End Mill for Aluminium
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£48.76 excl. VAT
£58.51 incl. VAT
FRANKEN 3 Flute High Performance Long Length End Mill
FRANKEN Top-Cut 3 Flute High Performance Long Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£19.25 excl. VAT
£23.10 incl. VAT
FRANKEN 4 Flute Short Length High Performance End Mill
FRANKEN Top-Cut 4 Flute Short Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£17.03 excl. VAT
£20.44 incl. VAT
Pulsar Blue 2 Flute Rib Processing Slot Drill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£26.94 excl. VAT
£32.33 incl. VAT
CLARKSON TiALN Coated HSS Co8 Multi Flute Long Length Fine Pitch Ripper
CLARKSON TiALN Coated HSS Co8 Multi Flute Long Length Fine Pitch Ripper
- HSS 8% cobalt
- Fine pitch
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£37.61 excl. VAT
£45.13 incl. VAT
Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel
Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- Corner radius
- High speed cutting
- High feed geometry
- Short flute for maximum strength
£33.50 excl. VAT
£40.20 incl. VAT
Alu-XP 3 Flute Long Length Weldon Shank Ripper
Alu-XP 3 Flute Long Length Weldon Shank Ripper
- Excellent surface finishes.
- Superior chip removal.
- Flatted shank.
- Micrograin solid carbide substrate.
- Corner protected.
£25.00 excl. VAT
£30.00 incl. VAT
Pulsar Blue 6 & 8 Flute 45 Degree Helix Extra Long Series End Mill for Hardened Steel
Pulsar Blue 6 & 8 Flute Extra Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£49.82 excl. VAT
£59.78 incl. VAT
£10.38 excl. VAT
£12.46 incl. VAT