Face Milling Tool Holder Bodies for Indexable Face Milling

Sort By

FMA01-080-SEET12.

80mm Diameter 45 Degree Face Mill for SEET Inserts (Fine Pitch) 6 Teeth

Series: FMA01-080-A27-SE12-06C

45 Degree milling cutter with positive, soft cutting geometry.
Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
Diameter Range available from 50mm-315mm
Wiper inserts available for excellent surface finish.

Starting From:
£170.35ex VAT
£204.42inc VAT

FMA02-125-SEET12.

125mm Diameter 45 Degree Face Mill for SEET Inserts (Coarse pitch) 6 Teeth

Series: FMA02-125-B40-SE12-06C

45 Degree milling cutter with positive, soft cutting geometry.
Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
Diameter Range available from 50mm-315mm
Wiper inserts available for excellent surface finish.

Starting From:
£199.13ex VAT
£238.96inc VAT

FMA02-080-SEET12.

80mm Diameter 45 Degree Face Mill for SEET Inserts (Coarse pitch) 4 Teeth

Series: FMA02-080-A27-SE12-04C

45 Degree milling cutter with positive, soft cutting geometry.
Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
Diameter Range available from 50mm-315mm
Wiper inserts available for excellent surface finish.

Starting From:
£124.93ex VAT
£149.92inc VAT

FMA02-063-SEET12.

63mm Diameter 45 Degree Face Mill for SEET Inserts (Coarse pitch) 4 Teeth

Series: FMA02-063-A22-SE12-04C

45 Degree milling cutter with positive, soft cutting geometry.
Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
Diameter Range available from 50mm-315mm
Wiper inserts available for excellent surface finish.

Starting From:
£109.77ex VAT
£131.72inc VAT

FMA01-063-SEET12.

63mm Diameter 45 Degree Face Mill for SEET Inserts (Fine Pitch) 5 Teeth

Series: FMA01-063-A22-SE12-05C

45 Degree milling cutter with positive, soft cutting geometry.
Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
Diameter Range available from 50mm-315mm
Wiper inserts available for excellent surface finish.

Starting From:
£153.69ex VAT
£184.43inc VAT

25mm FMA07 Series 45 Degree Indexable End Mill for ONHU06 Inserts - ZCCCT.

25mm Diameter 45 Degree End Mill for ONHU06 8 Edged Inserts 2 Teeth

Series: FMA07-025-XP20-ON06-02

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£102.21ex VAT
£122.65inc VAT

40mm FMA07 Series 45 Degree Indexable End Mill for ONHU06 Inserts - ZCCCT.

40mm Diameter 45 Degree End Mill for ONHU06 8 Edged Inserts 3 Teeth

Series: FMA07-040-XP25-ON06-03

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£124.16ex VAT
£148.99inc VAT

32mm FMA07 Series 45 Degree Indexable End Mill for ONHU08 Inserts - ZCCCT.

32mm Diameter 45 Degree End Mill for ONHU08 8 Edged Inserts 2 Teeth

Series: FMA07-032-XP25-ON08-02C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£88.59ex VAT
£106.31inc VAT

40mm FMA07 Series 45 Degree Indexable End Mill for ONHU08 Inserts - ZCCCT.

40mm Diameter 45 Degree End Mill for ONHU08 8 Edged Inserts 3 Teeth

Series: FMA07-040-XP25-ON08-03

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£124.16ex VAT
£148.99inc VAT

50mm FMA07 Series 45 Degree Indexable Face Mill for ONHU06 Inserts - ZCCCT.

50mm Diameter 45 Degree Face Mill for ONHU06 8 Edged Inserts 5 Teeth

Series: FMA07-050-A22-ON06-05C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£195.34ex VAT
£234.41inc VAT

63mm FMA07 Series 45 Degree Indexable Face Mill for ONHU06 Inserts - ZCCCT.

63mm Diameter 45 Degree Face Mill for ONHU06 8 Edged Inserts 7 Teeth

Series: FMA07-063-A22-ON06-07C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£226.85ex VAT
£272.22inc VAT

80mm FMA07 Series 45 Degree Indexable Face Mill for ONHU06 Inserts - ZCCCT.

80mm Diameter 45 Degree Face Mill for ONHU06 8 Edged Inserts 7 Teeth

Series: FMA07-080-A27-ON06-07C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£244.05ex VAT
£292.86inc VAT

100mm FMA07 Series 45 Degree Indexable Face Mill for ONHU06 Inserts - ZCCCT.

100mm Diameter 45 Degree Face Mill for ONHU06 8 Edged Inserts 8 Teeth

Series: FMA07-100-B32-ON06-08C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£271.43ex VAT
£325.72inc VAT

63mm FMA07 Series 45 Degree Indexable Face Mill for ONHU08 Inserts - ZCCCT.

63mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Inserts 5 Teeth

Series: FMA07-063-A22-ON08-05C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£195.34ex VAT
£234.41inc VAT

80mm FMA07 Series 45 Degree Indexable Face Mill for ONHU08 Inserts - ZCCCT.

80mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Inserts 6 Teeth

Series: FMA07-080-A27-ON08-06C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£219.56ex VAT
£263.47inc VAT

100mm FMA07 Series 45 Degree Indexable Face Mill for ONHU08 Inserts - ZCCCT.

100mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Inserts 7 Teeth

Series: FMA07-100-B32-ON08-07C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£243.78ex VAT
£292.54inc VAT

63mm FMA12 Series 45 Degree Indexable Face Mill for ONHU08 Inserts - ZCCCT.

63mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Positive Inserts 5 Teeth

Series: FMA12-063-A22-ON08-05

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Three-dimensional chip breaker for tough materials.
Smooth cut due to positive and sharp cutting edge.

Starting From:
£217.84ex VAT
£261.41inc VAT

80mm FMA12 Series 45 Degree Indexable Face Mill for ONHU08 Inserts - ZCCCT.

80mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Positive Inserts 6 Teeth

Series: FMA12-080-A27-ON08-06

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Three-dimensional chip breaker for tough materials.
Smooth cut due to positive and sharp cutting edge.

Starting From:
£222.41ex VAT
£266.89inc VAT

100mm FMA12 Series 45 Degree Indexable Face Mill for ONHU08 Inserts - ZCCCT.

100mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Positive Inserts 7 Teeth

Series: FMA12-100-B32-ON08-07C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Three-dimensional chip breaker for tough materials.
Smooth cut due to positive and sharp cutting edge.

Starting From:
£243.78ex VAT
£292.54inc VAT

FMA07-032-ONHU06.

32mm Diameter 45 Degree End Mill for ONHU06 8 Edged Inserts 2 Teeth

Series: FMA07-032-XP25-ON06-02C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£106.76ex VAT
£128.11inc VAT

FMA07-125-ONHU06.

125mm Diameter 45 Degree Face Mill for ONHU06 8 Edged Inserts 9 Teeth

Series: FMA07-125-B40-ON06-09C

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£320.73ex VAT
£384.88inc VAT

FMA07-125-ONHU08.

125mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Inserts 8 Teeth

Series: FMA07-125-B40-ON08-08

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£291.49ex VAT
£349.79inc VAT

FMA07-160-ONHU06.

160mm Diameter 45 Degree Face Mill for ONHU06 8 Edged Inserts 11 Teeth

Series: FMA07-160-C40-ON06-11

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£380.18ex VAT
£456.22inc VAT

FMA07-160-ONHU08.

160mm Diameter 45 Degree Face Mill for ONHU08 8 Edged Inserts 10 Teeth

Series: FMA07-160-C40-ON08-10

45 Degree milling cutter.
Cost benefit factor due to 16 cutting edges on insert.
Thick geometry insert for better stability and break resistance.
Different chip breakers for best chip breaking.
Two insert sizes available

Starting From:
£360.62ex VAT
£432.74inc VAT