Indexable Milling Tools and Systems

• Diameter range Ø12 – 63 mm
• For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
• For square shoulder milling, slot milling and ramping 
• Milling cutter with positive, soft cutting geometry
• Inserts with two cutting edges

• Diameter range Ø12 – 63 mm
• For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
• For square shoulder milling, slot milling and ramping
• Milling cutter with positive, soft cutting geometry
• Inserts with two cutting edges
• Weldon shank

• Diameter range Ø40–250 mm
• For steel, stainless steel, cast iron, nonferrous metals and heat-resistant alloys
• For square-shoulder, slot and plunge milling
• Milling cutter with positive, soft cutting geometry
• Inserts with two cutting edges

• Diameter range Ø25 – 40 mm
• For steel, cast iron and non-ferrous metals
• Double sided, thicker inserts for high stability and deeper cutting depths
• Inserts with four cutting edges

• Diameter range Ø40 – 250 mm
• For steel, cast iron and non-ferrous metals
• Double sided, thicker inserts for high stability and deeper cutting depths
• Inserts with four cutting edges

• 45 Degree milling cutter with positive, soft cutting geometry.
• Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
• Diameter Range available from 50mm-315mm
• Wiper inserts available for excellent surface finish

• Diameter range Ø40 – 125 mm
• Sharp cutting edge geometry combined with robust tangential inserts
• First choice for large cutting depths with high feed rates.
• Specially designed cutting edge with high precision control for high quality 90 degree square shoulder milling

• 45 Degree milling cutter with positive, soft cutting geometry.
• Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
• Diameter Range available from 50mm-315mm
• Wiper inserts available for excellent surface finish.

• Diameter range 80mm to 315mm
• For steel, stainless steel and cast iron
• Milling cutter with positive, soft cutting geometry
• Wedge clamping

• Diameter range Ø63 – 315 mm
• For steel, stainless steel and cast iron
• Inserts with eight cutting edges
• Double sided, thicker inserts for high stability and deeper cutting depths
• Wiper geometry for good surface quality
• Normal and fine pitch

• Diameter range Ø25 – 63 mm
• For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
• Screw clamping

• Diameter range Ø50 – 250 mm
• For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
• Screw clamping

• Diameter range Ø15 – 50 mm
• For steel, stainless steel and cast iron
• Screw clamping
• Mould and die industry

• Diameter range Ø15 – 50 mm
• For steel, stainless steel and cast iron
• Screw clamping
• Mould and die industry

• Diameter range Ø50 – 200 mm
• For steel, stainless steel and cast iron
• Screw clamping
• Mould and die industry

• Diameter range Ø42 – 200 mm
• For steel, stainless steel and cast iron
• Screw clamping
• Mould and die industry

APKT-PF carbide milling insert

• Grade YBC302 is our best performing insert for milling steel
• CVD coated
• PF chipbreaker is designed for finishing
• APKT geometry insert

APKT-PM carbide milling insert

• Grade YBC302 is our best performing insert for milling steel
• CVD coated
• PM chipbreaker is designed for medium machining
• APKT geometry insert

APKT-APF carbide milling insert

• Grade YBM253 is our best performing insert for milling stainless steel
• CVD coated
• APF chipbreaker is designed for finishing
• APKT geometry insert

ANGX-GM carbide milling insert

• Grade YBC302 is our best performing insert for milling steel
• CVD coated
• GM chipbreaker is designed for medium machining
• ANGX geometry insert

SDMT-PM carbide milling insert

• Grade YBC302 is our best performing insert for milling steel
• CVD coated
• PM chipbreaker is designed for medium machining
• SDMT geometry insert

SDMT-PM carbide milling insert

• Grade YBD252 is our best performing insert for milling cast iron
• CVD coated
• PM chipbreaker is designed for medium machining
• SDMT geometry insert

• Diameter range Ø125 – 315 mm
• For steel, stainless steel, cast iron and non-ferrous metals
• Inserts with eight cutting edges
• Wedge clamping

• Diameter range Ø125 – 315 mm
• For steel, stainless steel, cast iron and non-ferrous metals
• Inserts with eight cutting edges
• Wedge clamping